|
Item |
Characteristics |
|
Operating Temperature Range(oC) |
-55~+105 |
|
Rated Voltage Range (V) |
6.3~35 |
|
Nominal capacitance range (uF) |
1~220 |
|
Capacitance Tolerance(20oC,120Hz) |
+/-20% |
|
Leakage current (uA) |
I≤0.01CV or 3 whichever is
greater (at 20oC, after 2 minutes)
C: Nominal capacitance (uF) V:
Rated voltage (V) |
|
Dissipation Factor(20oC,120Hz) |
|
Rated voltage (v) |
6.3 |
10 |
16 |
25 |
35 |
|
D.F. |
0.22 |
0.19 |
0.16 |
0.14 |
0.12 |
|
|
Low Temperature
Stability(120Hz) |
|
Rated voltage v) |
6.3 |
10 |
16 |
25 |
35 |
|
Impedance ratio |
Z-25oC/Z+20oC |
2 |
2 |
2 |
2 |
2 |
|
Z-40oC/Z+20oC |
4 |
4 |
3 |
3 |
3 |
|
|
Load Life(+105oC) |
|
Time |
1000hours |
|
Leakage current |
Not more than the
specified value |
|
Capacitance change |
within ?0% of the initial value(≤16V
: within ?5% of the initial value) |
|
Dissipation factor |
Not more than 300%
of the specified value |
|
|
Shelf Life(+105oC) |
After
storage for 1000 hours at +105℃,
Rated voltage
to be applied for 30 minutes, the capacitors shall meet the
requirement of load life above |
|
Resistance to Soldering Heat |
The capacitors shall be kept on the hot plate maintained at
250℃ for
30 seconds. After removing from the hot plate and restored
at room temperature, they meet the following requirement.
|
Leakage current |
Not more than the
specified value |
|
Capacitance change |
within ?0% of the initial value |
|
Dissipation factor |
Not more than the specified value |
|