|
Item |
Characteristics |
|
Temperature Range(oC) |
-40~+85 |
|
Rated
Voltage Range (V) |
4~100 |
|
Nominal
capacitance range (uF) |
0.1~1500 |
|
Leakage
Current (uA) |
I≤0.01CV or
3 whichever is greater (at 20oC,
after 2 minutes)
C:
Nominal Capacitance (uF), V: Rated
Voltage (v) |
|
Capacitance Tolerance(20oC,120Hz) |
?/span>20% |
|
Dissipation Factor(20oC,120Hz) |
|
Rated voltage (v) |
4 |
6.3 |
10 |
16 |
25 |
35 |
50 |
63 |
100 |
|
D.F. |
0.35 |
0.28 |
0.24 |
0.20 |
0.16 |
0.14 |
0.12 |
0.12 |
0.12 |
|
|
Temperature Stability(120Hz) |
|
Rated voltage v) |
4 |
6.3 |
10 |
16 |
25 |
35 |
50 |
63 |
100 |
|
Impedance ratio |
Z-25oC/Z+20oC |
<Φ8 |
7 |
4 |
3 |
2 |
2 |
2 |
2 |
2 |
2 |
|
|
≥Φ8 |
7 |
5 |
4 |
3 |
2 |
2 |
2 |
2 |
2 |
|
Z-40oC/Z+20oC |
<Φ8 |
15 |
8 |
8 |
4 |
4 |
3 |
3 |
3 |
3 |
|
|
≥Φ8 |
15 |
10 |
8 |
6 |
4 |
3 |
3 |
3 |
3 |
|
|
Load
Life(+85oC) |
|
Time |
2000hours |
|
Leakage current |
Not more than the specified
value |
|
Capacitance change |
within ?0% of the initial
value(≤16V
: within ?5% of the initial
value) |
|
Dissipation factor |
Not more than 200% of the
specified value |
|
|
Shelf
Life(+85oC) |
After
storage for 1000 hours at +85℃,
Rated voltage
to be applied for 30 minutes, the
capacitors shall meet the requirement of
load life above |
|
Resistance to Soldering Heat |
The capacitors shall be kept on the hot
plate maintained at 250℃
for 30 seconds. After removing from the
hot plate and restored at room
temperature, they meet the following
requirement.
|
Leakage current |
Not more than the specified
value |
|
Capacitance change |
within ?0% of the initial
value |
|
Dissipation factor |
Not more than the specified
value |
|
