|
Item |
Characteristics |
|
Temperature Range(oC) |
-40~+85 |
|
Rated Voltage Range (V) |
6.3~50 |
|
Nominal capacitance range (uF) |
0.1~100 |
|
Leakage Current (uA) |
I≤0.05CV or 10 whichever is
greater (at 20oC, after 2 minutes)
C: Nominal Capacitance (uF),
V: Rated Voltage (v) |
|
Capacitance Tolerance(20oC,120Hz) |
?/span>20%
|
|
Dissipation Factor(20oC,120Hz) |
|
Rated voltage (v) |
6.3 |
10 |
16 |
25 |
35 |
50 |
|
D.F. |
0.26 |
0.22 |
0.20 |
0.20 |
0.20 |
0.18 |
|
|
Temperature Stability(120Hz) |
|
Rated voltage v) |
6.3 |
10 |
16 |
25 |
35 |
50 |
|
Impedance ratio |
Z-25oC/Z+20oC |
4 |
3 |
2 |
2 |
2 |
2 |
|
Z-40oC/Z+20oC |
8 |
6 |
4 |
4 |
3 |
3 |
|
|
Load Life(+85oC) |
|
Time |
1000hours(with polarity inverted for every 250
hours) |
|
Leakage current |
Not more than the
specified value |
|
Capacitance change |
within ?0% of the initial value |
|
Dissipation factor |
Not more than 200%
of the specified value |
|
|
Shelf Life(+85oC) |
After
storage for 1000 hours at +85℃,
Rated voltage
to be applied for 30 minutes, the capacitors shall meet the
requirement of load life above |
|
Resistance to Soldering Heat |
The capacitors shall be kept on the hot plate maintained at
250℃ for
30 seconds. After removing from the hot plate and restored
at room temperature, they meet the following requirement.
|
Leakage current |
Not more than the
specified value |
|
Capacitance change |
within ?0% of the initial value |
|
Dissipation factor |
Not more than the specified value |
|
